Tenda TEG3224P - DHCP Snooping

User Guide
154
Fields on the screen are described below:
Field
Description
DHCP Snooping
Enable/Disable DHCP snooping feature
globally. By default, it is disabled.
Source MAC
Address Check-up
Config whether source MAC address
check-up feature is enabled or not.
Port Setup
To configure DHCP snooping port settings, click Device Management -> DHCP Snooping -> Port
Setup as below:
Fields on the screen are described below:
Field
Description
Port
The corresponding port number.
Port Property
Configure the current port's DHCP
snooping property.