Tenda TEG3224P User Manual

User Guide
222
Note: Set control mode to PORT
TENDA(config-if)# dot1x port-control auto
Note: Specify port control mode as auto
TENDA(config-if)# dot1x port-control force-authorized
Note: Specify port control mode as force authorized
TENDA(config-if)# dot1x port-control force-unauthorized
Note: Specify port control mode as force unauthorized
TENDA(config-if)# dot1x port-reauthentication
Note: When the port control mode is PORT, you can enable port re-authentication manually
TENDA(config-if)# no dot1x
Note: Disable 802.1X
 802.1X status
TENDA# show dot1x all
Note: Display 802.1X global settings and port status
TENDA# show dot1x statistics
Note: Display all ports’ status
TENDA# show dot1x interface gigabitethernet 0/1
Note: Display a single port’s status
5.3.36 Save Configurations
TENDA# copy running-config startup-config
Note: Save current settings
TENDA# copy running-config 192.168.111.79：mib.conf
Note: Save current settings to local hard drive via TFTP server
TENDA# copy startup-config 192.168.111.79:mib.conf
Note: Save settings to local hard drive via TFTP server
 Delete settings on port
TENDA(config-if)#no cos
Note: Delete priority settings on port; the default is 0
TENDA(config-if)# flow-control off
Note: Disable flow control
TENDA(config-if)# shutdown
Note: Disable port

Tenda TEG3224P Specifications

General

Brand	Tenda
Model	TEG3224P
Category	Switch
Language	English