Tenda TEG3224P User Manual

User Guide
57
 To configure voice VLAN setup:
1. Select Enable or Disable from the pull-down list. Voice VLAN security mode is disabled by default.
2. From the Voice VLAN Aging Time field, specify the amount of time between 5 and 43200min. As for
the port joining in voice VLAN under auto mode, if the system doesn't receive any voice message
after ageing time, this port will be deleted from voice VLAN automatically. As for the port joining in
voice VLAN under manual mode, you need to delete it manually.
3. Click OK to save your configurations.
Note--------------------------------------------------------------------------------------------------------------------------------
Only in 802.1Q VLAN mode, can you enable voice VLAN.
-------------------------------------------------------------------------------------------------------------------------------------------
Port Setup
To display the Voice VLAN Port Setup page, click VLAN Management ->Voice VLAN -> Port Setup.
Fields on the screen are described below:
Field
Description
Port
Display port number.
VLAN
Display voice VLAN ID on corresponding port.
Mode
Display voice VLAN mode: auto or manual.
Status
Display voice VLAN status: Enable or Disable.
 To configure voice VLAN port setup on a single port, click the port you wish to on the port setup page:

Tenda TEG3224P Specifications

General

Brand	Tenda
Model	TEG3224P
Category	Switch
Language	English