Tenda TEG3224P - Time Range Management

User Guide
209
TENDA(config)# ip igmp snooping last-member-query-interval 4
Note: Config group-specific query max response time
TENDA(config)# ip igmp snooping querier max-response-time
Note: Config group-general query max response time
 Delete IGMP settings (Restore IGMP factory defaults)
TENDA(config)# no ip igmp snooping dyn-mr-aging-time
Note: Reset Max age of IGMP routing port to factory default
TENDA(config)# no ip igmp snooping host-aging-time
Note: Reset Max age of IGMP host port to factory default
 Enable/disable IGMP port fast leave
TENDA(config)# interface range gigabitethernet 0/1-4
Note: Enter port configuration directory
TENDA(config-if)# fast-leave on
Note: Enable IGMP port fast leave
TENDA(config-if)# fast-leave off
Note: Disable IGMP port fast leave
5.3.23 Time Range Management
 Configure time range
TENDA(config)# timerange 99 absolute start time 11 23 2010 end time 08 16 2013
Note: Configure absolute time
TENDA(config)# timerange 67 weekday 8
Note: Configure periodic time
TENDA(config)# timerange 12 periodic start time 03:40 end time 05:35
Note: Configure time slices
 Delete time range
TENDA(config)# no timerange 67
Note: Delete time range
TENDA(config)# no timerange 12 periodic start time 03:40 end time 05:35
Note: Delete time slices
 View time range
TENDA# show timerange
Note: View time range