Tenda TEF1226P-24-440W - User Manual

Tenda TEF1226P-24-440W Specifications

General

Brand	Tenda
Model	TEF1226P-24-440W
Category	Switch
Language	English

Summary

1 Device Login

1.1 Login

Steps to access the switch's Web administration page using default credentials.

2 System Administration

2.1 System Info

2.2 User Management

2.3 Reset

Restore the switch to factory default settings by clearing all configurations.

2.5 Firmware Upgrade

Download and install the latest firmware to update switch functionality and stability.

3. Port Management

3.1 Port Configuration

3.2 Port Mirroring

3.2.2 Port Mirroring Configuration

3.3 Port Statistics

3.4 Rate Limit

4 Link Aggregation

4.2 Link Aggregation Configuration

5 Network Extension

6 PoE Management

7 VLAN Management

7.2 Port VLAN Configuration

Configure Port VLAN mode, including mode toggle, port assignment, and application scenarios.

7.3 ONE KEY VLAN Configuration

7.4 802.1 Q VLAN Configuration

Configure 802.1Q VLAN for tagged traffic, including mode, division, port properties, and scenarios.

8 Device Management

8.1 MAC Binding Configuration

Configure MAC Binding to control network access by associating MAC addresses with ports for security.

8.2 QoS Configuration

8.3 STP and RSTP Configuration

8.4 IGMP Snooping Configuration

8.5 SNMP Configuration

10 Configuration Management

10.1 Back up the system configuration information

Backup the switch's current configuration for disaster recovery and easy setup.

10.2 Restore configuration information from files

Restore the switch configuration from a previously saved backup file.