VLAN Management
- 53 -
Step 2: Partition VLAN.
1. Go to the VLAN Management > 802.1Q VLAN page;
2. Select Ports 1 and 5, enter 5 in the input box below VLAN List, and click +Add;
3. Select Ports 1 and 7, enter 7 in the input box below VLAN List, and click +Add.
Step 3: Set port properties.
1. Go to the VLAN Management > Port Properties page.
2. Select Port 5, set PVID to 5 and Tag Processing Policy to Remove Tag (Rm), and click
OK
3. Select Port 7, set PVID to 7 and Tag Processing Policy to Remove Tag (Rm), and click
OK
4. Select Port 1, set PVID to 1 and Tag Processing Policy to Add Tag, and click OK
To Next Page
Loading...
