24-Port Managed Gigabit Switch
4.3.2 LACP Port Stauts
Please select the left meun as TEG3224T→Monitor→LACP→Port
Status to enter the following window:
The page provides a status overview for LACP status for all ports.
Port
The switch port number.
LACP
'Yes' means that LACP is enabled and the port link is up. 'No'
means that LACP is not enabled or that the port link is down.
Key
The key assigned to this port. Only ports with the same key can
aggregate together.
Aggr ID
The Aggregation ID assigned to this aggregation group. IDs 1
and 2 are GLAGs while IDs 3-14 are LLAGs.
Partner System ID
The partners System ID (MAC address).
Partner Port
The partners port number connected to this port.
119
To Next Page
Loading...
Need help?
General
