24-Port Managed Gigabit Switch
1.5.2 Rack-mountable Installation in 19-inch Cabnit
The TEG3224T can be mounted in an EIA standard-sized,
19-inch rack, which can be placed in a wiring closet with other
equipment. To install, attach the mounting brackets on the
Switch’s side panels (one on each side) and secure them with
the screws provided.
Then, use the screws provided with the equipment rack to
mount the Switch on the rack and tighten it.
Note:
For safety, please read the installation instruction carefully before
installing the device.
5
To Next Page
Loading...
