24-Port Managed Gigabit Switch
Chapter 3 Switch Configuration
3.1 Web Login
As TEG3224T provides Web-based management login, you can
configure your computer’s IP address manually to log on to the
Switch. The default seetings of the Switch are shown below.
Parameter Default Value
Default IP address 192.168.0.1
Default user name admin (for administrator)/user (for common users)
Default password admin (for administrator)/user (for common users)
You can log on to the welcome window of the Switch through
following steps:
1. Connect the Switch with the computer NIC interface.
2. Power on the Switch.
3. Check whether the IP address of the computer is within this
network segment: 192.168.0.xxx (“xxx” ranges 2~254), for
example, 192.168.0.100.
4. Open the browser, and enter http://192.168.0.1 and then press
“Enter”. The switch login window appears, as shown below.
14
To Next Page
Loading...
