24-Port Managed Gigabit Switch
3.3.3 Account
Please select the left meun as TEG3224T→Configuration→
System→Account to enter the following window:
Click “Add” to enter the System Password window as below:
The page allows you to configure the system password required to
access the web pages or log in from CLI.
Old Password
Enter the current system password. If this is incorrect, the new
password will not be set.
New Password
The system password. The up to 32 characters must be taken
from the NVT ASCII character set (32 - 126).
Confirm New Password
The new password must be entered twice to catch typing
errors.
19
To Next Page
Loading...
