24-Port Managed Gigabit Switch
1.5 Installation
Please follow the following instructions in avoid of incorrect
installation causing device damage and security threat.
Put the Switch on stable place or desktop in case of falling
damage.
Make sure the Switch works in the proper AC input range and
matches the voltage labeled on the Switch.
To keep the Switch free from lightning, do not open the Switch’s
shell even in power failure.
Make sure that there is proper heat dissipation from and
adequate ventilation around the Switch.
Make sure the cabinet to enough back up the weight of the
Switch and its accessories.
1.5.1 Desktop/Horizontal Installation
Sometimes users are not equipped with the 19-inch standard cabnit.
So when installing the Switch on a desktop, please attach these
cushioning rubber feet provided on the bottom at each corner of the
Switch in case of the external vibration. Allow adequate space for
ventilation between the device and the objects around it. Please
refer to the following figure:
4
To Next Page
Loading...
Need help?
General
