24-Port Managed Gigabit Switch
3.7.2 802.1x Configuration
Please select the left meun as TEG3224T→Configuration→
802.1x to enter the following window:
The page allows you to configure the IEEE 802.1X system and port
settings. The IEEE 802.1X standard defines a port-based access
control procedure that prevents unauthorized access to a network
by requiring users to first submit credentials for authentication. The
802.1X configuration consists of two sections, a system- and a
port-wide.
System Configuration:
Mode
Indicates if the 802.1X protocol is globally enabled or disabled
on the switch.
RADIUS IP
The IP address of the RADIUS Server.
RADIUS Secret
40
To Next Page
Loading...
