24-Port Managed Gigabit Switch
The secret - up to 29 characters long - shared between the
RADIUS Server and the Switch.
Reauthentication Enabled
If checked, clients are re-authenticated after the interval
specified by the Reauthentication Period. Re-authentication
can be used to detect if a new device is plugged into a switch
port, and to detect if the authenticated clients are connected
well or not.
Reauthentication Period
Determines the period, in seconds, after which a connected
client must be reauthenticated. This is only active if the
Reauthentication Enabled checkbox is checked. Valid values
are in the range 1 to 3600 seconds.
EAP Timeout
Determines the time the switch shall wait for the supplicant
response before re-transmitting a packet. Valid values are in
the range 1 to 255 seconds.
Note
：
The parameters configured on this window must be consistent
with the Authentication server’s; otherwise, the 802.1x client can
not be authenticated.
Port Confi
guration:
The table has one row for each port on the Switch and four columns.
The columns are:
Port
41
To Next Page
Loading...
Need help?
General
