24-Port Managed Gigabit Switch
The port ID. It cannot be changed.
Admin State
Sets the authentication mode to one of the following options:
Auto: Requires an 802.1X-aware client (supplicant) to be
authorized by the authentication server. Clients that are not
802.1X-aware will be denied access.
Authorized: Forces the port to grant access to all clients,
802.1X-aware or not.
Unauthorized: Forces the port to deny access to all clients,
802.1X-aware or not.
Port State
The current state of the port. It can undertake one of four
values:
802.1X Disabled: The 802.1X protocol is globally disabled.
Link Down: The 802.1X protocol is enabled, but there is no
link on the port.
Authorized: The port is authorized. This is the case when the
802.1X protocol is enabled, the port has link, and the Admin
State is Auto and the supplicant is authenticated or the Admin
State is "Authorized".
Unauthorized: The port is unauthorized. This is the case when
the 802.1X protocol is enabled, the port has link, and the
Admin State is Auto, but the supplicant is not (yet)
authenticated or the Admin State is "Unauthorized".
Restart
Two buttons are available for each row. The buttons are only
enabled when the 802.1X protocol is enabled and the port's
42
To Next Page
Loading...
Need help?
General
