24-Port Managed Gigabit Switch
Configured column is used to view or change the IP configuration.
The Current column is used to show the active IP configuration.
DHCP Client
Enable the DHCP client by checking this box. If DHCP fails and
the configured IP address is zero, DHCP will retry. If DHCP fails
and the configured IP address is non-zero, DHCP will stop and
the configured IP settings will be used. The DHCP client will
announce the configured System Name as hostname to
provide DNS lookup.
IP Address
Provide the IP address of this switch.
IP Mask
Provide the IP mask of this switch.
IP Router
Provide the IP address of the router.
SNTP Server
Provide the IP address of the SNTP Server.
VLAN ID
Provide the managed VLAN ID. The allowed range is 1 through
4094.
T
imezone Offset (minutes)：
Provide the timezone offset relative to UTC/GMT. The offset is
given in minutes east of GMT. The valid range is from -720 to
720 minutes.
18
To Next Page
Loading...
