Tenda TEF1210P-8-150W - Application Scenarios

Device Management
- 57 -
After the settings are finished, click OK , and the system will automatically display the
setting information in the list below. You can view the list and check whether the setting
information is correct.
Specification of parameters in the display list:
Header entry
Description
Port
Display port numbers of the switch.
Status
Display the status of the static MAC address binding function of this
port.
Bound static
MAC Address
Bound MAC
1/2/3
Display an access device MAC address bound to this port.
8.1.3 Application Scenarios
8.1.3.1 Adding MAC Binding
Networking Requirements
The MAC address of the user device is FC:4D:D4:F8:71:CF. Connect it to port 3 of the
switch. Bind this user device to port 3 of the switch to prevent other unauthorized users from
performing loiter net and gaining data from other ports by pretending to an authorized user's
MAC address.
Networking Diagram
Configuration procedures
1. Log in to the web browser-accessible administrator page of the switch and go to the
Device Management > MAC Binding Page;
2. Click the Select Port drop-down menu and select "3";