Tenda TEF1210P-8-150W - Port Setting

Device Management
- 71 -
Hello Time
Display the Hello Time value of Root bridge setting.
Max Age
Display the value of maximum aging time of root bridge setting.
Forward Delay
Display the value of forwarding delay of root bridge setting.
8.3.2 Port setting
The port priority and path cost can be set herein, and the information on the roles and status
of switch ports can be inquired.
Click the Device Management > STP > Port configuration to access the page.
Specification of parameter setting:
Header entry
Description
Select port
Select the port to be set.
Priority
Set the port priority, effective values are integral multiples of 16, and the
lower the value, the higher the priority.
Port priority is an important reference to determine whether the ports
connected to port will be selected to work as root ports. Ports on
downstream device connected to a port with a higher priority will be
selected to work as root port under equivalent conditions
Path cost
(0=AUTO)
Set the path cost of port.