TEG1216T/1224T Giga Web Smart Switch
tracert
Tracert command display the directory passed
when the package arrive the destination,also
display the time of arriving each node. Similar to
the “ping” ,but it can get much more detailed
information than “ping” .Display all the passed
directory , node IP and time costed.
net stop
Stop Windows NT network service, e.g.net
stop dnscache
net send
Send messenger to the other network customer,
computer or communication name. You must
run the messenger service if you want to receive
data.
Appendix 3 TCP/IP Address Setting (Take Winxp as Sample)
Open the “Control Panel” (Diagram 1):
Diagram 1
Click “Network and Internet Connections”, the windows as below
(diagram 2):
37
To Next Page
Loading...
