11N Wireless Broadband Router User Guide
61
¾ Filter mode: You can select either “Permit only” or
“Forbid only”.
¾ Access Policy: Select one number from the
drop-down list.
¾ Remark: A simple description of the configured file.
You can also leave it blank.
¾ MAC Address: Enter the MAC address you want to
run the access policy.
¾ Time: Select the time range of MAC address
filter.
¾ Date: Select the day(s) to run the access policy.
¾ Enable: To enable/disable the access policy
(forbid/permit the packets matched with the
access policy to pass through the router).
Example 1 Forbid the computer with the MAC address
To Next Page
Loading...
