Wireless Network Adapter Users’ Guide
Note:
1. Under Windows 7and VISTA, there is no switch
function between Tenda UI and Zero config.
2. Operation on Tenda UI becomes impossible when
wireless is disabled or it is switched to Zero config.
3 .Under Windows 2000 system, you need to use Tenda
UI to conduct wireless configuration.
4.Under Windows XP or Windows 2003 system, if you
want to use the system internally attached wireless
configuration program to configure the network adapter,
please first disable Tenda UI or switch UI to Zero config.
5. Client application program is “Station Mode” (Client
Mode) by default.
6. Tenda UI users must be managers, some operations
may be inaccessible to other ordinary users due to their
given restricted rights.
Client UI enables configuration of two modes Station
mode (Client Mode) and AP mode (soft AP Mode).
-11-
To Next Page
Loading...
