Wireless Network Adapter Users’ Guide
want to filter in the physical address field.
Add: To add the entered client MAC address to the list.
Delete: To delete an existing MAC address in the list.
Remove All: To delete all clients’ MAC address in the list.
1．Add the MAC address of the client’s wireless network
adapter to the list and select “All Permitted” in filter policy.
Computers whose MAC addresses are not added to the
list will be refused by default.
2. Select “All Blocked” in filter policy then only host
computers whose MAC address are included in the list
can not be connected to this AP wireless network.
3.2.4About
This interface displays the parameters regarding the
software as the picture below:
-31-
To Next Page
Loading...
