11N Wireless Broadband Router User Guide
22
network. The default value is 1492. Do NOT modify
it unless necessary, but if a specific website or web
application s oftware c annot o pen o r b e e nabled,
you can try to change the MTU value to 1450, 1400,
etc.
¾ Service Name: The connecti on name for current
PPPOE, enter i t if necessary ,otherwise, l eave it
blank.
¾ AC Name: The service name, enter it if necessary,
otherwise, leave it blank.
¾ Connect Automatica lly: Connect automati cally
to the Inter net after rebooti ng the system or
connection failure.
¾ Connect on Deman d: R e-establish your
connection t o the Internet after the speci fic time
(Max Idle Time). Zero means you are connected to
the Internet al l ti mes. Otherwi se, enter the
minutes to be elapsed before you are disconnected
from the Internet.
¾ Connect Manually: Connect to the Internet by
users manually.
¾ Connect on Fixed Time: Connect to the Internet
during the time you fix automatically.
NOTE:
The “ Connect on Fixed Time ” goes i nto effect
only when you have set the current time in “Time