11N Wireless Broadband Router User Guide
53
protocol you are using, you can select “Both”.
¾ Enable: Click the Enable checkbox to bring the set
rule into effect.
¾ Delete: Clear all settings of this item.
¾ Well-known service port: The well -known
protocol ports are listed in the drop-down li st.
Select one and select a sequence number in the ID
drop-down list and then click “Add”, this port will be
added automatically to th e ID l ist. For other wel l
known servi ce ports that are not l isted, y ou can
manually add them to the list.
¾ Add to: Add the sel ected well-known port to the
policy ID.
For Example: You want to share some large files with
your friends outside of your local area network, however,
they are too bi g, and it’s not con venient to tr ansfer
them. Then, you can b uild a F TP server on y our
computer and set the router’s port range forwarding to
enable your friends to ac cess to thes e fil es on your
computer. Suppose that your F TP server or your
computer’s static IP addr ess is 192.168.0.10, and you
wish your fr iends can ac cess the s erver through the
default port 21 and adopts TCP protocol.
Please follow the steps below to configure.
1.Enter 21 in both start port and end port fields, or you
can al so sel ect F TP from the wel l-known servi ce port
To Next Page
Loading...
Need help?
General
