Need help?Do you have a question about the Tenma 72-8690 Series and is the answer not in the manual?
Displays output voltage and current readings via LED meters.
Adjusts output voltage (CV) and current (CC) using dedicated knobs.
Controls channel modes (FREE/TRACK) and meter display (VOLT/CURR).
Includes ground connection, output terminals for CH1/CH2/CH3, and power switch.
Explains independent and auto-tracking modes for the main channels.
Details output voltage/current ranges and terminal grounding.
Displays output voltage and current readings via LED meters.
Adjusts output voltage (CV) and current (CC) using dedicated knobs.
Controls channel modes (FREE/TRACK) and meter display (VOLT/CURR).
Includes ground connection, output terminals for CH1/CH2/CH3, and power switch.
Explains independent and auto-tracking modes for the main channels.
Details output voltage/current ranges and terminal grounding.
General| Output Current | 0 - 5A |
|---|---|
| Power Rating | 150W |
| Number of Outputs | 1 |
| Frequency | 50/60Hz |
| Model | 72-8690 |
| Type | Bench Power Supply |
| Output Voltage | 0 - 30VDC |
| Ripple and Noise | < 1mVrms |
| Display | LED |
| Protection Features | Over Voltage Protection (OVP), Over Current Protection (OCP), Over Temperature Protection (OTP) |
| Cooling | Fan |
| Input Voltage | 110V/220V AC |
To Next Page
