•
•
Take the battery out from the meter if it is not used for a long time
Do not use or store meter in high temperature, humid, inflammable, and
strong magnetic field environments
Soft cloth and mild detergent should be used to clean the surface of the
meter when servicing. No abrasive and solvent should be used on the
meter
Make sure the meter is dry before storing away
Do not attempt to repair or service the meter unless you are qualified to do
so and have the relevant calibration, performance test, and service
•
•
•
•
•
•
•
•
•
3 x test leads (red, black & green) –
Instruction Manual
Tool Box
USB interface cable
To Next Page
Loading...
