TensCare Perfect MamaTENS

Other manuals for TensCare Perfect MamaTENS

Quick Start Guide120 pages

Questions and Answers

B
Barbara VazquezAug 20, 2025
What to do if the output will not increase above zero on my TensCare Personal Care Product?
- C
  Christopher PughAug 20, 2025
  If the output of your TensCare Personal Care Product won't increase above zero, make sure the device is correctly attached to your body. Also, try using the second lead wire, as the lead may not be connected or could be faulty. If necessary, purchase a replacement lead. Lead wires can break at the bend where they leave the machine, causing intermittent or no output.
J
Jasmine PierceAug 22, 2025
Why do I feel no sensation using my TensCare Personal Care Product?
- M
  mistyphillipsAug 22, 2025
  If you're not feeling any sensation from your TensCare Personal Care Product, ensure you have applied all 4 electrode pads to create a complete circuit. Additionally, the intensity might be too low; try increasing the strength. Most users typically feel something at a setting below 10.
B
Brandon AtkinsAug 25, 2025
Why does my TensCare Personal Care Product show a low battery display?
- D
  David WilliamsonAug 25, 2025
  If your TensCare Personal Care Product displays a low battery warning, the batteries are likely low. Replace them to resolve this issue.
V
Vanessa RussellAug 26, 2025
How to fix a TensCare Personal Care Product with no display?
- M
  Michele JohnsonAug 27, 2025
  If your TensCare Personal Care Product has no display, first, replace the batteries as they may be flat. If that doesn't work, ensure the batteries are inserted correctly by checking the +/- orientation and removing any plastic wrap. If the issue persists, the springs in the battery compartment might be damaged, and you should contact the supplier.
M
Megan MoralesAug 28, 2025
What to do if the output will not increase above zero on my TensCare Medical Equipment?
- C
  Christopher CoxAug 28, 2025
  If the output of your TensCare Medical Equipment will not increase above zero, ensure the device is correctly attached to your body. You can also try using the second lead wire, as the lead wire may be damaged or faulty, especially at the bend where it leaves the machine. If necessary, purchase a replacement lead wire.
C
Curtis BrownAug 30, 2025
What to do if I feel no sensation using TensCare Medical Equipment?
- J
  jasonsanfordAug 30, 2025
  If you are not feeling any sensation when using your TensCare Medical Equipment, check that you have applied all four electrode pads to ensure a complete circuit. Additionally, the intensity may not be strong enough; increase the strength, as most users feel something at a setting below 10.
S
Steven HaydenSep 1, 2025
How to fix a TensCare Medical Equipment with no display?
- K
  kurthurstSep 1, 2025
  If your TensCare Medical Equipment has no display, here are a few things to check: 1. Replace the batteries, as they may be flat. 2. Ensure the batteries are inserted correctly by checking the + / - orientation and removing any plastic wrap. 3. If the springs in the battery compartment are damaged, contact your supplier.
N
Nathan BallSep 3, 2025
What to do if the intensity will not go above zero on TensCare Perfect MamaTENS Personal Care Products?
- O
  othompsonSep 3, 2025
  If the intensity on your TensCare Personal Care Product won't increase from zero, it could be due to an open circuit cutout. Make sure the device is correctly attached to your body. Alternatively, a faulty or damaged lead wire might be the cause, and a replacement may be needed.
K
Karen BarrettSep 5, 2025
Why do I have no sensation when using TensCare Perfect MamaTENS?
- E
  Elizabeth CookSep 5, 2025
  If you're not feeling any sensation when using your TensCare Personal Care Product, first ensure that both electrode pads per lead wire are applied to create a complete circuit. If that's not the issue, try increasing the strength setting. Most users typically feel something at a setting below 10.
S
Sabrina CraneSep 7, 2025
What to do if TensCare Perfect MamaTENS Personal Care Products show a low battery display?
- K
  Kyle DiazSep 7, 2025
  If your TensCare Personal Care Product displays a low battery warning, the batteries are likely low and need to be replaced.