Tense TPM-05 User Manual

-12-
11.7 - Setting the Date:
In order to change the date, press the ''Set'' key while
the Figure-65 is on the screen. The screen comes in
figure-75. Underline is on the step which ındicate the day.
In order to change the day press the ''Down'' key. Then if
you press the key on the right ; underline comes down of
the mouth step. Press the ''Down'' key in order to change
the mouth. Then if you press the key on the right; the
Figure-65
Out1
Din1
Out2
Figure-75
Out1
Din1
Out2
underline comes down of the year step. Press the ''Down'' key in order to change the year. After the date is
updated, when you press the ''Set'' key ;it is recorded and Figure-65 comes to the screen. Pressing the right
key; you can pass through the parameters in the menu or pressing ''Esc'' key; you can quit the menu.
Date display is organized as day / month / year.
In order to change the time; press the Set key while the
figure-66 is on the screen. The Figure-76 comes to the
screen; the underline is on the step which shows the
clock. Press the'' Down'' key in order to change the clock.
Then if you press the key on the right, the underline
comes down the step of second. Press ''down'' key to
change the second. After the clock, minute and second is
11.8 - Setting the Time:
Figure-66
Out1
Din1
Out2
Figure-76
Out1
Din1
Out2
updated ,it is recorded when you press the ''Set'' key and figure-66 comes to the screen. Pressing the right
key;you can pass through the parameters in the menu or pressing ''Esc'' key; you can quit the menu.
Time display is organized as 24 hours.
11.6 - Changing the Connection Type:
In order to change the connection type; press ''Set'' key
while the Figure-64 is on the screen. Figure-74 comes to
the screen. It supports two types of connection like 3P4L
(3 phase current 3 phase voltage neutral)and 3P3L
(3 Phase current 3 phase voltage without neutral).
The link that says "Set" is acceptable. Press the right key
to change the connection type. After the connection type
Figure-64
Out1
Din1
Out2
Figure-74
Out1
Din1
Out2
is selected, When you press the key, it is saved and the screen comes in figure-64. Pressing the right key;
you can pass through the parameters in the menu or pressing ''Esc'' key; you can quit the menu.
11.5 - Enter Password Value:
Figure-73
Out1
Din1
Out2
Figure-63
Out1
Din1
Out2
In order to change password; press set button while
Figure-63 is on the screen . The Figure-73 comes to the
screen. In order to pass through steps; press the button
on the right. In order to change the value of the step press
the ''down'' button. You can change the step value with
underline. If you press the set key after entering the
password, the password is saved and the screen comes in
figure-63. Pressing the right key ;you can pass through the parameters in the menu or pressing ''Esc'' key;
you can quit the menu.

Tense TPM-05 Specifications

General

Brand	Tense
Model	TPM-05
Category	Measuring Instruments
Language	English