ACX-1 Series Instrument www.tensitron.com pg. 4
2. SPECIFICATIONS
Full Scale Accuracy
For all models up through 500 lb.: 2%
For ACX-1200-1: 3%
Accuracy for custom calibrations is material specific
Power Requirements
For Instrument Input: 9 VDC…2.2A
For AC Adapter: 100-240V~50-60Hz 0.48A
Power Supply operates with input voltages from 100 – 240V and includes several
interchangeable adapters allowing use with European, U.S., Australian, English and other
plug configurations.
Battery: Rechargeable NiMH, custom proprietary design
Battery Life
Approximately 12 hours depending upon backlighting intensity.
Operating Temperature
32º F to 120 º F.
If these values are exceeded, battery charge/discharge rates will decline. However, this could be
offset by using the power supply. Charging in direct sunlight or near a heat source will not
produce a full charge and may permanently damage battery pack.
Storage Temperature
20º F to 158º F. (Instrument and Charger)
Ambient Humidity
10% to 90% non-condensing
Dimensions
All models except 500 and 1200: 3.37” x 8.14” x 1.39”
ACX-500 and 1200: 5.20” x 8.14” x 1.39” (See Figure 1)
Weight
1.5 lb. (depending upon instrument configuration).
Environment:
Indoor or outdoor use, dust-free environment.
To Next Page
Loading...
Need help?
General
