6
Step 1
Step 2
Step 3
Step 4
Place the frame (J) and the base plate (L) upside down on a flat
surface.
Line up the holes and connect the parts with four screws (AA).
Fasten the hinges (O and P, fire bowl left and right) with washers
(EE), screws (BB) and nuts (DD) to the back of the fire bowl (G).
Place the burner brackets (Q) in the fire bowl.
Align the holes and secure the brackets with two screws (BB)
each..
Required tools (included)
1 x Phillips screwdriver (JJ)
1 x adjustable spanner (II)
Assembling the BBQ
1. First read through the assembly instructions completely.
2. Allow yourself enough time for assembly and find an even
working space of two to three square meters.
3. Place the necessary tools within reach.
4. Small parts such as handles might be preassembled.
Step 5
Stand the frame (J) upright.
Fasten the gas cartridge holder (R) with two screws (AA) at the
rear left of the frame (J).
Insert the valve (S) through the opening on the right front of the
frame.
Line up the holes and screw the pieces together with two screws
(BB).
P20131_TEPRO_ABINGTON_3142N_TischGasGrill_GB_20201126.indd 6 1/12/2020 2:42 PM
To Next Page
Loading...
