tepro ABINGTON - BBQ Assembly Steps 6-9; Step 6: Insulating Rings; Step 7: Fire Bowl to Frame; Step 8: Burner and Valve Connection

7
Place the fire bowl (G) in the frame (J).
Connect the parts with four screws (CC).
Place the burner (F) in the fire bowl so that the end of the burner
can be passed through the hole in the housing and connected
to the valve (S).
Fasten the burner (F) to the burner brackets (Q) with screws
(AA).
Plug the ignition cable into the valve.
Step 6
Attach the four insulating rings (H) to the fire bowl (G) with
screws (AA).
Step 7
Step 8
Step 9
Fasten the hinges (M and N, lid left and right) with washers (EE),
screws (BB) and nuts (DD) to the back of the lid (A).
P20131_TEPRO_ABINGTON_3142N_TischGasGrill_GB_20201126.indd 7 1/12/2020 2:42 PM