tepro ABINGTON - BBQ Assembly Steps 14-18; Step 14: Grate Placement; Step 15: Regulator Hose Connection; Step 16: Side Shelf Attachment

9
I
mportant:
All screws must be tightly fastened.
Step 14
Place the BBQ grates (D) over the flame tamer in the fire pan.
Step 15
Screw the regulator with hose (T), counterclockwise (left-hand
thread), onto the connection part.
See: Connection to the device, page 10
Step 16
Attach the two side shelves (I) on the left and right
Step 17
Place the control knob (U) flush on the valve (S).
Step 18
Place thegrease container (K) in the base plate (L).
P20131_TEPRO_ABINGTON_3142N_TischGasGrill_GB_20201126.indd 9 1/12/2020 2:42 PM