First operation
14 V-04/2018
4 First operation
4.1 Charging the battery
The battery must be charged before using the device for the first time.
If no charger is connected, the display will show the charge state of the battery
when the device is switched on.
Attention!
Danger of damage to device
► Never deep discharge the battery.
Notice
The lithium-polymer battery can be charged at any time without
reducing the life of the battery. Interrupting the charging
process will not damage the battery.
Notice
When the battery is fully charged the mains USB charger
automatically switches to trickle charge. The battery can remain
permanently in the charging station.
Notice
The battery will discharge if the device is not used for an
extended period. In this case, it must be charged before use.
Please note that the battery will reach its full capacity only after
being fully discharged and charged several times.
Attention!
Danger of damage to device!
Forced or incorrect connection of the charging cable can
damage the multi-functional socket or other parts of the
device.
► Connect the correct end of the cable to the device.
To Next Page
Loading...