7-11
(4) Inspection mode setting
: Inspection Mode
Function
Enters/Exits the inspection mode.
* The inspection mode setting is not retained when the power is shut off.
Setting range
: In inspection mode
: In normal mode
Initial setting
: In normal mode
Remarks For the inspection mode, refer to “8.2 Inspection mode.”
(5) Energy-saving operation setting
: Energy-Saving Operation setting
Function
Enables/Disables the energy-saving operation.
The energy-saving operation enables variable control of pump-stop
period depending on the operation conditions of the unit in the automatic
mode.
Adjustable
range
: Enables the energy-saving operation
: Disables the energy-saving operation
Initial setting
: Enables the energy-saving operation
Remarks
If the energy-saving operation is disabled, the pump-stop check period is
set to 60 seconds.
To Next Page
Loading...