TeraTron Desktop KeyReader Plus - User Manual

12 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

Desktop KeyReader Plus

Operating Manual

Operating Manual

Desktop KeyReader Plus

©TeraTron GmbH

Page 1 of 12

Document Version 1.0

Date: February 25, 2021

Author: Marcel Mörchen

DesktopKeyReaderPlus_EN.docx

Desktop KeyReader Plus

Table of Contents

Questions and Answers

I
isullivanAug 2, 2025
What to do if TeraTron eBook Reader Desktop KeyReader Plus fails to read key data?
- J
  Johnny CastroAug 2, 2025
  If your TeraTron eBook Reader's Desktop KeyReader Plus isn't reading key data, even when the left LED indicates it's ready, ensure the USB port provides at least 500mAh (USB 2.0 standard). Also, make sure the USB cable is directly connected to the port and not through a passive USB hub or extended with another cable.

Summary

Introduction

Setup

Procedure to install and launch ITOOLS-USBTrayApp software for device operation.

Display and Control Elements

Details on the white status LED and multicolor key LED located on the device front.

Mechanical Design

Status LED Overview

Configuring Desktop KeyReader Plus

Operating Desktop KeyReader Plus

Reading the Vehicle Key

Instructions on placing and positioning vehicle keys on the tray for successful reading.

Vehicle Key Data

Details on vehicle key data transmission to PC and storage via ITOOLS-USBTrayApp.

Troubleshooting

Regulatory Notes

TeraTron Desktop KeyReader Plus Specifications

General

Brand	TeraTron
Model	Desktop KeyReader Plus
Category	eBook Reader
Language	English