RISK ASSESSMENT
QPP147 Section 1 Rev. March 07
C. HAZARDS -
PRE-OPERATION
RISK CONTROLS & PRE-OPERATIONAL PRECAUTIONS
C1. Inadvertent operation of plant
due to poor housekeeping.
C1. Keep the area of the operator's cabin and seat clean and tidy. Do not leave parts, tools or other
objects in the area of the operator's seat. These can cause unexpected accidents while you are
working.
C2. Stress and tiredness from poor
sitting position and posture.
C2. Adjust the operator's seat so that you can sit comfortably with good posture, and all control
levers are within easy reach without having to lean or strain your body. Check that you can
reach the foot pedals comfortably with your back resting against the back of the seat.
C3. Accidental operation of plant if
operated by more than one
operator. . Passengers may
collide with obstructions or be
thrown off the machine, or they
may cause a hazard by
obstructing the operator's field
of view
C3. Before and during work nobody other than the operator should sit in the operator's seat or climb
onto the crane.