EasyManua.ls Logo

Terex Franna AT-15 User Manual

Terex Franna AT-15
35 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
QPP147.1
RISK ASSESSMENT
Question and Answer IconNeed help?

Do you have a question about the Terex Franna AT-15 and is the answer not in the manual?

Terex Franna AT-15 Specifications

General IconGeneral
ModelAT-15
Max Load Capacity15 tonnes
Engine Power129 kW (173 hp)
Operating Weight17, 500 kg
Boom Length16.3 m
Max Lift Height18.3 m
Drive4x4
SteeringHydraulic power steering

Summary

General Potential Hazards and Risk Controls

General Hazards

Covers unintended movement, fire risks, and handling hazardous chemicals.

General Hazards - Working Procedures

Addresses site conditions, warning plates, and collision risks during operation.

Pre-Operation Hazards

Covers hazards related to housekeeping, operator fatigue, and accidental operation.

Operational Potential Hazards & Risk Controls

Hazards - Starting the Engine

Addresses carbon monoxide poisoning, fire from spills, and accidental movement during startup.

Hazards When Operating the Crane

Covers structural failure, tip over, collision, and operator concentration issues.

Hazards When Controlling Boom

Addresses reduced stability, tip over during derricking, and damage from overhoisting.

Hazards When Operating the Winch

Covers dropping excessive loads, entanglement of wire rope, and collision from twisted rope.

Hazards When Extending and Retracting the Boom

Addresses automatic stop from over-hoisting and damage from pushing/pulling objects.

Hazards When Slewing

Covers collision with people/objects and tip over from centrifugal forces.

Hazards When Handling the Jib

Addresses jib breaking and falling off from overload.

Hazards - Special Types of Crane Operations

Covers tandem lifting and operations in underground areas.

Post-Operational Potential Hazards and Risk Control

Post Operation Hazards

Addresses inadvertent operation, collision from rolling, parked crane collision, and mechanical failure.

Inspection and Maintenance Potential Hazards and Risk Control

Inspection and Maintenance Hazards

Covers failure of controls, equipment malfunctions, collision, and burns from hot radiators.

Appendix 1: Working Environment (Site) Checklist

Related product manuals