EasyManua.ls Logo

Terex Genie SX-135 XC User Manual

Terex Genie SX-135 XC
79 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Operator's Manual
Serial Number Range
S
X
-135 X
C
from SX135H
-
515
CE
with
Maintenance
Information
Original Instructions
Second Edition
Second Printing
Part No. 1301106GT

Other manuals for Terex Genie SX-135 XC

Question and Answer IconNeed help?

Do you have a question about the Terex Genie SX-135 XC and is the answer not in the manual?

Terex Genie SX-135 XC Specifications

General IconGeneral
Turntable Rotation360° continuous
Fuel TypeDiesel
Transport Height8.5 ft (2.59 m)
Platform Length8 ft (2.44 m)
Platform Width3 ft (0.91 m)
Stowed Height8.5 ft (2.59 m)

Summary

Introduction

Intended Use and Familiarization Guide

Defines machine's intended use and operator training requirements.

Symbol and Hazard Pictorials Definitions

Tilt Alarm and Emergency Recovery Pictorials

Pictorials for tilt alarm recovery and emergency lowering.

General Safety

Personal Safety

Personal Fall Protection Equipment (PFPE)

Requirements for wearing and using PFPE.

Work Area Safety

Electrical and Stability Hazards

Hazards from electrical lines and machine tip-over.

Operational Hazards and Precautions

Hazards from wind, tilt alarms, and safe driving practices.

Controls

Inspections

Pre-operation Inspection Fundamentals

Importance and purpose of pre-operation inspections.

Pre-operation Inspection Checklist

Comprehensive list of items for pre-operation checks.

Function Test Fundamentals

Importance and procedure for testing machine functions.

Workplace Inspection Checklist

List of hazardous situations to identify and avoid in the work area.

Operating Instructions

Engine Starting and Emergency Stop

Procedures for starting the engine and using the emergency stop.

Driving on Slopes and Drive Enable

Operating on slopes and the drive enable system.

Transport and Lifting Instructions

Transport Safety and Winching Configuration

Safety guidelines for transport and winching.

Returning Machine to Operation and Lifting

Steps to return machine to operation and lifting guidelines.

Lifting Safety and Rigging

Safety precautions and guidelines for rigging and lifting.

Maintenance

Engine Oil and Fuel Requirements

Procedures for checking engine oil and diesel fuel types.

Hydraulic Oil and Coolant Level Checks

Procedures for checking hydraulic oil and engine coolant.

Related product manuals