Need help?Do you have a question about the Terex Genie Z-34/22 IC and is the answer not in the manual?
General| Max Working Height | 12.52 m |
|---|---|
| Platform Height | 10.52 m |
| Horizontal Reach | 6.78 m |
| Platform Capacity | 227 kg |
| Machine Height | 2.00 m |
| Drive Speed - raised | 1.1 km/h |
| Gradeability | 30% |
| Engine Type | Kubota D1105 |
| Fuel Type | Diesel |
| Weight | 8, 000 lbs |
| Turning Radius | 11 ft 6 in |
| Overall Length | 5.52 m |
| Drive Speed - stowed | 6.0 km/h |
| Tyres | Solid |
| Engine Power | 18.5 kW |
| Maximum Platform Height | 10.52 m |
| Machine Width | 1.75 m |
| Machine Length | 5.52 m |
| Drive Speed | 3.5 mph |
Details the requirement and proper use of personal fall protection equipment when operating the machine.
Advises on maintaining safe distances from electrical power lines and apparatus.
Outlines platform capacity limits and stability considerations, including tire type and ground conditions.
Details safety precautions related to platform occupants, guardrails, and maintaining footing.
Highlights awareness of blind spots, boom position, tailswing, and overhead obstructions.
Emphasizes operating in well-ventilated areas and avoiding contact with internal components.
Provides warnings regarding flammable substances, refueling, and operating in hazardous locations.
Explains the importance and purpose of performing pre-operation and routine inspections.
Lists components and areas to be checked during a pre-operation inspection for damage and proper installation.
Outlines the purpose of function tests in identifying malfunctions before machine use.
Describes how to test the steering system, lift/drive select, and drive/braking functions.
Explains procedures to test the machine's response to chassis pitch and roll angles.
Provides checklists and fundamentals for inspecting the work area for hazards.
Step-by-step guide for starting the machine's engine, including fuel selection and cold weather notes.
Instructions on how to use the emergency stop buttons to halt all machine functions.
Instructions for driving the machine, including speed control and awareness of boom position.
Guidance on determining slope ratings and safely operating the machine on inclines.
Describes tilt sensor activation settings and platform overload indicator light functions.
To Next Page
