Attachments
Only use attachments that are recommended by Terex.
Make sure that all necessary guards and protective
equipment are in place and functioning prior to operat-
ing any attachment.
Wear protective glasses and protective equipment as
required by conditions or as recommended in the
attachment’s operation manual.
Ensure that all personnel are far enough away from
the work area so they will not be struck by flying ob-
jects.
Stay clear of the cutting edges, pinching surfaces or
crushing surfaces of the attachment while performing
any attachment maintenance, testing or adjustments.
Machine Labels and Decals
Labels and decals placed on the machine provide
safety information and operating instructions.
Familiarize yourself with the location and significance
of these labels to ensure your safety.
Product Identification Number
The Product Identification Number (PIN) is located on
the left side of the firewall next to the operator seat.
(figure 1-1). Always provide the PIN when contacting
the dealer about parts, service, warranty or acces-
sories. No warranty claims will be processed unless
the PIN is provided.
Safety Label Examples
Examples of the labels and decals displayed on the
machine are shown on this page.
WARNING
Crush Hazard
Death or serious injury can result
from contact with moving lift arm or
attachment.
Keep clear of lift arms and
attachments.
1-4
Rubber Track Loader
1. Product Safety
1-1
When replacement parts are required for your
machine, use only genuine Terex replacement
parts or parts that meet or exceed original
specifications including, but not limited to physical
dimensions, type, strength and material.
Installing lesser components can lead to premature
failures, product damage, personal injury or death.
WARNING
CRUSH HAZARD
Contact with moving machine can
result in death or serious injury.
Keep clear of moving machine.
2030-593
WARNING
Fall Hazard
Serious injury or death can result
from falling.
Use the provided access system when
entering or exiting the machine.
Entanglement Hazard
Rotating parts can cause personal injury.
Keep away from fan and belt while the
engine is running. Stop engine before
servicing.
2030-600
WARNING
WARNING
Crush Hazard
Death or serious injury can result
from contact with moving lift arm or
attachment.
Install lift arm brace prior to servicing.
NOTICE
Fire Hazard
Flammable debris can collect near hot
components and lead to a fire.
Read Operator’s manual
Keep engine, exhaust and chassis
areas free of debris.
Burn Hazard
Hot fluid under pressure can scald.
Allow the machine to cool thoroughly
before opening.
2030-595
WARNING
To Next Page
Loading...
