Operations Manual United Kingdom 1-January-2014
TA9 & 10 Tier 4 Page 1 - 1
Introduction 1
1Introduction
1.1 Important Information
TEREX appreciates your choice of our product for your application. Our number one priority is
user safety which is best achieved by our joint efforts. We feel you can make a major contribution
to safety if, you as the machines user:
• Comply with all the relevant National Laws and Local Regulations.
• Read, Understand and Follow the instructions in this and any other manuals supplied with this
machine.
• Use Good, Safe Work Practices in a common sense way.
• Only Use Trained Operators to operate the machine who are directed by informed and
knowledgeable supervision. The operator of this machine must be a competent person who
has received thorough training in the use of this type of equipment.
If there is anything in this manual which is not clear or there is information which you think should
be added, contact the Manufacturers Service Department who will deal with your problem or
request.
Machine LEFT and RIGHT HAND. All references in this manual to LEFT and RIGHT are as
viewed from the Operating Position (Operators Seat) with Operator facing the skip.
We reserve the right to make improvements to these machines without incurring any need to
change these operating instructions.
Any modification to this machine which has not been approved by the Manufacturer in writing is
prohibited and immediately invalidates the Manufacturers warranty.
1.2 Safety Alert System
The Safety Alert System identifies important safety messages in this manual. When you see this
symbol, adhere to all safety messages that follow to avoid possible injury or death.
1.3 Intended Use
The machine has been designed and tested to carry out the function of transporting various free
flowing materials. If used correctly, it will provide an effective means of transportation and meet
the appropriate performance standards and regulations.
Use of this product in any other way is prohibited and contrary to its intended use
1.4 Operations Manual
This manual is a guide to the safe operation of the machine and the layout and position of all
controls. It also contains details of checks and procedures within the scope of the operator to
keep the machine in a safe and serviceable condition.
This manual is not a training manual. Contact your local dealer or representative for details of
suitable training courses.
Any person who intends to use this equipment must read this operations manual carefully before
operating the machine.
To Next Page
Loading...
Need help?
General
