1. Release the screw at the back of the controller casing.
2. Take o the casing.
3. In case of a radiator connected to a central heang system, close the
valves and remove the heang agent. For electric radiators – take it o
the wall and posion it in such a way to prevent pouring the heang
agent out of the radiator during disconnecng the heang element.
4. Untwist the heang element using spanner no 24.
1. Disconnect the device from electricity prior to cleaning.
2. Heang element control head should be cleaned with a dry or damp cloth with a very
small amount of detergents, which should never contain any solvents or abrasive
agents.
This product should not be disposed of as general waste but should be brought to the
appropriate collecon point for recycling of electric and electronic devices. This informa-
on is provided by the sign on the product, user manual and packaging. Informaon on
the appropriate point for used devices can be provided by Your local distributor or manu-
facturer of the product. Thank You for Your eort towards environment protecon.
To Next Page
Loading...
