10
Intended use of device
The heang element is an electric device
intended solely for installaon in radiators
(standalone or connected to the central
heang system) to serve as space heaters,
or clothes and towels dryer.
Heang element power output should be
matched with radiator output for parame-
ters of 75/65/20° C.
Technical informaon
Model markings
(power cable type):
– PW (Straight cable with plug)
– PB (Straight cable without plug)*
– SW (Spiral cable with plug)
Power supply: 230 V / 50 Hz
Appliance class: Class I
Towel rail connecon thread: G 1/2"
Ingress protecon rang: IPx5
Temperature measurement: Internal radiator temperature and external room
temperature
Heat outputs available:
Length of heang element:
120 200 300 400 600 800 1000 1200 [W]
315 275 300 335 365 475 565 660 [mm]
* Device intended to be connected permanently to the system