TERMA MOA BLUE - MOA Blue Operation; MOA Blue Features and Manual Operation

13
EN
MOA Blue
MOA Blue electric heating element is
equipped with a radiator temperature sensor
(acve by default!) and an addional room
temperature sensor that can be acvated
by a mobile control applicaon.
Turning on the unit for a specied period of
me does not mean that it will receive the
same maximum power at all mes. The el-
ement when switched on, works at nominal
power level for a short time to reach pro-
grammed temperature and then periodical-
ly turns itself on and o, consuming just as
much energy as is needed to maintain the
set temperature taking into account exter-
nal condions.
The heang element’s construcon, as well
as the physical characteriscs of the heat-
ing medium, cause the lower radiator tubes
(especially the boom two) to have a lower
temperature than the rest of the radiator –
this is perfectly normal.
The device is equipped with a thermal fuse,
which in emergency situations protects
against exceeding crical temperatures (this
fuse may be damaged at the temperature
of 82° C – it refers in parcular to heang el-
ements installed in radiators connected to
a central heang system).
The MOA can be operated using the but-
tons on the housing (see secon Manual
Operaon) or via a mobile device – smart-
phone, tablet (see secon Remote Control).
Manual Operaon
(a mobile operang device with installed
control applicaon may, but does not need
to be in the range)
Press briey the key to switch on the heat-
ing element.
RGB LED – TIMER, schedule and Bluetooth
communicaon indicator
On/O buon and TIMER switch
Temperature adjustment and
Bluetooth pairing
Blue LEDs – temperature seng indicators