TERMA MOA BLUE - Maintenance

12
8. Follow the subsequent guidelines when
connecng the electrical installaon:
a. Brown wire – live connecon to the
circuit (L).
b. Blue wire – connect to neutral (N)
c. Yellow & green wire – earth connec-
on (PE).
9. Before lling the radiator with heang me-
dium, ensure that the heang element is
ed properly and that it is water ght.
10. In central heang system radiator must
be ed with the valves enabling discon-
necon of the radiator from the rest of
the system.
11. The temperature of the heang agent in
the central heang system must not ex-
ceed 82° C!
12. For detailed installaon hints – see the
last pages of this manual.
Notes prior to removal:
1. Before dismantling permanently, discon-
nect the heang element from the mains
and ensure that the radiator is not hot.
2. Be aware. A radiator lled with liquid can
be very heavy. When moving the radiator,
ensure that you take the necessary safe-
ty precauons.
3. Before disassembly, close the appropriate
valves and drain the radiator completely-
to avoid causing any damage.
Product disposal
This product should not be disposed of as
general waste but should be brought to the
appropriate collecon point for recycling of
electric and electronic devices. This informa-
on is provided by the sign on the product,
user manual and packaging. Informaon on
the appropriate point for used devices can be
provided by your local authority, product dis-
tributor or the store from where the product
was purchased. Thank you for your eort to-
wards protecng the environment.
Maintenance
• Always disconnect the device from elec-
tricity before you start cleaning the radi-
ator or heang element.
• Recurrently check level of the heang
medium inside the radiator.
• Clean the item with a dry or damp cloth
with a small amount of detergent with-
out any solvents or abrasive agents.