EN
Maintenance
• Always disconnect the device from
electricity before you start cleaning the
radiator.
• Recurrently check level of the heang
medium inside the radiator.
• Clean the item with a dry or damp cloth
with a small amount of detergent with-
out any solvents or abrasive agents.
Before disassembly
1. Disconnect the device from electric cir-
cuit and ensure that the radiator has
cooled down before you start disassem-
bling the radiator.
2. Be careful — electric radiator lled with
heang liquid may be very heavy. Ensure
all necessary safety measures.
3. Prior to disassembly make sure that wa-
ter inside both the radiator and installa-
on does not cause any damage (close
the valves, empty the radiator, etc. if
required).
Ulizaon
This product should not be disposed of as
general waste but should be brought to the
appropriate collecon point for recycling
of electric and electronic devices. This in-
formaon is present on the product, user
manual and on packaging. Informaon on
the appropriate point for used devices can
be provided by your local authority or ven-
dor of the product.
Thank You for your eort towards environ-
ment protecon.
13
To Next Page
Loading...
