EasyManua.ls Logo

TermoPool AIC06 - 2.4. Maintenance and winterizing; 2.4.1 Maintenance; 2.4.2 Winterizing; 3. TROUBLE SHOOTING FOR COMMON FAULTS

Default Icon
56 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2.4.2 Winterizing
In winter season when you don’t swim, please cut off power sup
pump. When using the heat pump
3. TROUBLE SHOOTING
FAILURE
Heat pump doesn’t run
No power
Power switch is off
Fuse burned
The breaker is off
Fan running but with
insufficient heating
evaporator blocked
Air outlet blocked
3 minutes start delay
Display normal, but no
heating
Set temp. too low
3 minutes start delay
If above solutions don’t work, please contact your installer with detailed information and your model number.
Don’t try to repair it yourself.
ATTENTION
Please don’t try
14
In winter season when you dont swim, please cut off power sup
ply and drain water out of the heat
ump under 2 , make sure there is always wa
3. TROUBLE SHOOTING
FOR COMMON FAULTS
REASON
SOLUTION
No power
Wait until the power recovers
Power switch is off
Switch on the power
Fuse burned
Check and change
The breaker is off
Check and turn on the breaker
evaporator blocked
Remove the obstacles
Air outlet blocked
Remove the obstacles
3 minutes start delay
Wait patiently
Set temp. too low
Set proper heating temp.
3 minutes start delay
Wait patiently
If above solutions dont work, please contact your installer with detailed information and your model number.
Please dont try
to repair the heat pump by yourself to avoid any risk.
Important:
Unscrew the water union of inlet pipe
to let the water flow out.
When the water in machine freezes in
winter
season, the titanium heat
exchanger may be damaged.
ply and drain water out of the heat
s water flow.
FOR COMMON FAULTS
SOLUTION
Wait until the power recovers
Switch on the power
Check and change
the fuse
Check and turn on the breaker
Remove the obstacles
Remove the obstacles
Set proper heating temp.
If above solutions dont work, please contact your installer with detailed information and your model number.
to repair the heat pump by yourself to avoid any risk.
Unscrew the water union of inlet pipe
When the water in machine freezes in
season, the titanium heat