2.3. Trial after installation
Please check all the wirings carefully before turning on the heat pump.
2.3.1．Inspection before use
Check installation of the whole
connecting drawing;
Check the electric wiring according to the electrical wiring diagram and earthing connection;
Make sure that the main power is well connected;
Check if there is any obstacle in fr
2.3.2．Trial
The user is advised to start the water pump before the heat pump, and turn off the heat pump
before the water pump for long life circle.
The user should start the water pump, and check for any
the ON/OFF button of the heat pump, and set desired temperature in the
In order to protect the heat pump, the heat pump is equipped with start delay
starting the heat pump, the fan will start
compressor will start to run.
After pool heat pump starts up, check for any abnormal noise from the heat pump.
Check the temperature setting
2.4. Maintenance and winterizing
2.4.1 Maintenance
The main
tenance should be carried out once per year by qualified professional technician.
Cut off power supply of the
heat pump before cleaning,
examination and repairing .
Do not touch the electronic
components until the LED
indication lights on
Please clean the evaporator with household detergents or clean water, NEVER use gasoline,
thinners or any similar fuel.
Check bolts, cables and connections regularly.
文件中找不到关系 ID
为 rId106 的图像部
件。
13
Please check all the wirings carefully before turning on the heat pump.
Check installation of the whole
heat pump and the pipe connections according to the pipe
Check the electric wiring according to the electrical wiring diagram and earthing connection;
Make sure that the main power is well connected;
Check if there is any obstacle in fr
ont of the air inlet and outlet of the heat pump
The user is advised to start the water pump before the heat pump, and turn off the heat pump
before the water pump for long life circle.
The user should start the water pump, and check for any
leakage of water; Power on and press
the ON/OFF button of the heat pump, and set desired temperature in the
In order to protect the heat pump, the heat pump is equipped with start delay
starting the heat pump, the fan will start
to run in 3 minutes, in another
After pool heat pump starts up, check for any abnormal noise from the heat pump.
Check the temperature setting
.
2.4. Maintenance and winterizing
tenance should be carried out once per year by qualified professional technician.
Please clean the evaporator with household detergents or clean water, NEVER use gasoline,
Check bolts, cables and connections regularly.
Please check all the wirings carefully before turning on the heat pump.
heat pump and the pipe connections according to the pipe
Check the electric wiring according to the electrical wiring diagram and earthing connection;
ont of the air inlet and outlet of the heat pump
The user is advised to start the water pump before the heat pump, and turn off the heat pump
leakage of water; Power on and press
the ON/OFF button of the heat pump, and set desired temperature in the
thermostat.
In order to protect the heat pump, the heat pump is equipped with start delay
function. When
to run in 3 minutes, in another
30 seconds, the
After pool heat pump starts up, check for any abnormal noise from the heat pump.
tenance should be carried out once per year by qualified professional technician.
Please clean the evaporator with household detergents or clean water, NEVER use gasoline,
To Next Page
Loading...