1.1. When storing or moving the heat pump, the heat pump should be at the upright
position.
1.2. When moving the heat pump, do not lift the water union since the titanium heat
exchanger inside the heat pump will be damaged.
The heat pump must be installed by a professional team. The users are not qualified to
themselves, otherwise the heat pump might be damaged and risky for users’ safety.
2.1. Notice before installation
2.1.1. The inlet and outlet water unions
connected with hard pipes!
2.1.2．
In order to guarantee the heating efficiency, the water pipe length should be
the pool and the heat pump.
9
1.1. When storing or moving the heat pump, the heat pump should be at the upright
1.2. When moving the heat pump, do not lift the water union since the titanium heat
exchanger inside the heat pump will be damaged.
The heat pump must be installed by a professional team. The users are not qualified to
themselves, otherwise the heat pump might be damaged and risky for users’ safety.
2.1.1. The inlet and outlet water unions
can’t
bear the weight of soft pipes. The heat pump
In order to guarantee the heating efficiency, the water pipe length should be
1.1. When storing or moving the heat pump, the heat pump should be at the upright
1.2. When moving the heat pump, do not lift the water union since the titanium heat
The heat pump must be installed by a professional team. The users are not qualified to
install by
themselves, otherwise the heat pump might be damaged and risky for users’ safety.
bear the weight of soft pipes. The heat pump
must be
In order to guarantee the heating efficiency, the water pipe length should be
≤10m between
To Next Page
Loading...