Need help?Do you have a question about the TermoPool AIC06 and is the answer not in the manual?
Lists all components included with the heat pump after unpacking.
Details the recommended air temperature range for optimal heat pump performance.
Explains the benefits of the 'Smart' and 'Silence' operating modes.
Provides important usage warnings and safety precautions for the heat pump.
Essential checks and actions to perform before operating the heat pump.
Step-by-step guide on how to operate the heat pump using its control interface.
Explains the automatic and compulsory defrosting procedures for the heat pump.
Guides on regular upkeep and preparing the unit for the winter season.
Instructions for routine cleaning and inspection of the heat pump.
Procedures for draining water and preparing the unit for cold weather.
Ensures the heat pump is kept in an upright position during storage or transit.
Warning against lifting the water union to prevent damage to the heat exchanger.
Pre-installation checks and requirements for proper setup.
Specifies the need for hard pipes for water connections due to union strength.
Recommends maximum pipe length for optimal heating efficiency.
Detailed instructions for installing the heat pump, including location and dimensions.
Guidance on selecting an appropriate installation site and required clearance.
Specific instructions on securing the heat pump unit and connecting the water pump.
Details on electrical connections, protective devices, and cable requirements.
Wiring diagram for a 230V, 50Hz power supply.
Wiring diagram for a 400V, 50Hz power supply.
Specifies protective devices and cable types/sizes for installation.
Pre-operation checks to ensure correct installation and connections.
Procedures for starting and verifying the heat pump's operation post-installation.
Details on the annual maintenance tasks to be performed by a technician.
Specific instructions for winterizing the heat pump when not in use.
Guide on downloading the required mobile application from app stores.
Steps for registering a user account for the heat pump control app.
Process for registering an account using a phone number or email address.
Detailed steps for registering an account via a mobile number.
Instructions on setting up a 'family' within the app to manage devices.
Steps to bind the heat pump device to the mobile application, including Wi-Fi connection and device pairing.
Overview of the heat pump's functions and controls within the mobile app interface.
Guide on how to share device control with family members through the app.
To Next Page
General