1.Power On: Press
for 3 seconds to light up screen, then press
2.
Adjust Set Temperature: When screen is unlocked, press
3. Mode Selection: Press
a. Auto
: adjustable temperature range 12~
b. Heating
: adjustable temperature range 18~
c. Cooling :
adjustable temperature range 12~30
4. Smart/Silence mode selection:
①
Smart mode as default will be activated when heat pump is on, and screen shows
② Press to enter Silence Mode
(Suggestion:
select Smart mode for initial heating)
5. Defrosting
a.
Auto Defrosting: When heat pump is defrosting,
b.
Compulsory Defrosting: When heat pump is heating, press
compulsory defrosting, and
will be flashing. After defrosting,
(Note: Compulsory defrosting intervals should be more than 30 minutes and the compressor should run for more than 10
minutes.)
6
Auto
Heating
Cooling
Heating capacity percentage
Wifi connection
Water inlet
Water outlet
for 3 seconds to light up screen, then press
Adjust Set Temperature: When screen is unlocked, press
or
to display or adjust the set temperature.
: adjustable temperature range 12~
40℃
: adjustable temperature range 18~
40℃
adjustable temperature range 12~30
℃
Smart mode as default will be activated when heat pump is on, and screen shows
.
select Smart mode for initial heating)
Auto Defrosting: When heat pump is defrosting,
will be flashing. After defrosting,
Compulsory Defrosting: When heat pump is heating, press
and
together for 5 seconds to
will be flashing. After defrosting,
(Note: Compulsory defrosting intervals should be more than 30 minutes and the compressor should run for more than 10
to display or adjust the set temperature.
Smart mode as default will be activated when heat pump is on, and screen shows
.
will be flashing. After defrosting,
will stop flashing.
together for 5 seconds to
start
(Note: Compulsory defrosting intervals should be more than 30 minutes and the compressor should run for more than 10
To Next Page
Loading...